Canon imagePRESS C800 Series Technical & Service Manual page 96

Firmware upgrade in Safe download mode
Step Action
4 • Set dip switch SW1 to "on"
• Switch on engine
5 Blue bar: print engine state; Un-config-
ured
• Select [Firmware Upgrade]
6 Select or deselect [Upgrade auto]
See
7.0 Select [Upgrade from PRISMAsync]
or
Select [Upgrade from USB]
96 Chapter 8 - Firmware upgrades via PRISMAsync
NOTE
Make sure the Upgrade Policy
is set to "Manual upgrade ena-
bled" to upgrade from a USB
stick. Leave "Manual upgrade
disabled" to upgrade via the
PRISMAsync controller.
Upgrade auto settings on page
NOTE
Following steps will be execu-
ted automatically by PRISMA-
sync.
additional Info
86.
4