Passwords - Canon imagePRESS C800 Series Technical & Service Manual

Passwords

Passwords
When servicing the PRISMAsync for imagePRESS C800 Series or making adjustments you often
will need a password for a specific task.
See the list below for an overview of the default passwords.
• Enter Service Mode: 675756
• System Administrator: 71617000
• Key Operator: 13524
• Engine maintenance: 12345
• Remote manager: 12345678
Resetting the passwords
It could occur that the password for the system administrator, Key Operator or Engine
maintenance is lost.
The service technician is able to reset these passwords to the default value.
NOTE
In the settings editor the Remote Manager password is called Operator password.
Do the following steps to reset the passwords:
Procedure
1.
Open the Settings Editor on a remote PC connected to the network of the customer.
The Settings editor on page 62
See
2.
Browse to [Configuration] -> [Security] and click on [Reset the system administrator password].
3.
Enter the Service password
4.
Confirm your choice.
The System Administrator password is reset to the factory default.
5. You can use the system administrator password to change the other passwords.
14 Chapter 3 - Installation