Canon imagePRESS C800 Series Technical & Service Manual page 40

System service mode (PRISMAsync service mode)
No. Function
2 [ Leave Service Mode]
• [Leave Service Mode]: leaves the service
• [ End of service visit]: leaves the service
3 [Engine Service]
The [Engine Service] button is used enter the
host machine service mode. All service func-
tionality is available.
4 [Firmware Upgrade]
With this button you can start the upgrade procedure of the firmware of the host ma-
chine.
A USB-stick containing the firmware should be available.
The upgrade is done from this USB-stick and not via the SST-tool. See the Service
Manual of the host machine for detailed instructions.
[Engine Reports]
5
In the service mode a sorted list of all durables and periodically replaceable parts of
the engine and accessories can be generated and displayed on the operator panel.
The list is sorted by lifetime. Doing so is the easiest way for the Field Service Techni-
cian to get an overview of the status of all parts. For a more detailed description see
the appendix.
6 [External Finishers]
If there are External finishers connected to the host machine you have to set parame-
ters to make the connection work properly.
For a description of the parameters see the Service Manual of the host machine.
7 [POC Configuration]
In the POC (Printer Operator Care) configuration screen you can determine which key
operator tasks the customer is allowed to do with respect to the High Capacity Stacker
F1/G1.
If it is enabled a wizard appears and guides the customer through these tasks.
[Upgrade Policy]
8
The Manual upgrade policy is by default disabled and the installed software is control-
led by the PRISMAsync controller. If the manual upgrade policy is enabled it is possi-
ble to update the software of the host machine and finishers by using an USB stick.
40 Chapter 4 - Using the PRISMAsync
mode and switch to the Normal User Mode.
This is used to temporarily leave Service
Mode.
mode and the error analysis tab is cleared
and an entry in the data dump file is created
before returning to the Normal User Mode.
NOTE
The [Updater] button is not suppor-
ted in this screen and therefor the re-
sult is unpredictable.
The function of the other buttons is
described in the service manual of
the host machine.
Additional
4