Canon imagePRESS C800 Series Technical & Service Manual page 107

5. Legacy file system: Some antivirus software intervenes with the CreateUSB tool. To make
sure the USB stick is created correctly enable the legacy file system.
6. Select Start.
Check that you have the .NET 4.5 framework installed, and press OK if it is installed. Otherwise
Exit the CreateUSB tool and install the .NET 4.5 version. If you don't do this the tool will not work.
NOTE
If the message below appears make sure to download and install the .NET 4.5 framework. The
CreateUSB tool will not work without the .NET 4.5 framework.
4.
Press [OK] to start the programming process.
Additional illustration needed.
1. After pressing [OK] the following window will pop-up.
Select [Yes] to store existing jobs and settings, and to restore them automatically after the
installation.
NOTE
Do not select "Yes" when the PRISMAsync software version is V1.1
After making the selection, the process will start and the .iso image is programmed to the
stick.
Please wait until the CreateUSB tool indicates that the USB-stick is ejected and the process is
ready.
5. Remove the USB-stick from the PC.
The USB-stick is now ready for use. The name of the stick is OCEINSTALL
After you finish
Reuse an USB stick after installation on page 108
Preparation of the USB stick
Chapter 9 - System software 107