3. Fasten a joining bracket on each side of the
center rail
.
(FH M4x10, Torx 20)
×2
4. Fasten the left and right part of the rail to
the center part.
Depending on the type of wall, you may
need to remove the part temporarily after
marking the mounting points on the wall.
5. Fasten the left and right parts of the rail
to the wall.
Use the type and number of screws that
are required to support the system. You
can use any of the horizontal slots in the
rails.
×2
×n
7
Need help?
Do you have a question about the Webex Room Panorama and is the answer not in the manual?