Cisco Webex Room Panorama Installation Manual page 63

23.4 Insert the loudspeakers
The system has twelve loudspeakers; six on each
side of the camera. The speakers are equal.
We recommend you to start from the center
when mounting loudspeakers.
Repeat this procedure for all the speakers.
1. Connect the correct cable to
the loudspeaker.
The cables are marked
with numbers S1 to S12 -
counting from the left, see
illustration.
2. Enter the loudspeaker onto
the pegs.
Check that the rubber gaskets
stay firmly on the pegs.
Make sure that no cables,
including the cables from
the One Connect box, are
touching the loudspeakers.
61