Cisco Webex Room Panorama Installation Manual page 5

Packaging
You have received four or five pallets with parts
and components, depending on whether you have
ordered the optional cosmetic wall.
The pallets are marked with A, B, C, D, and E.
During installation, you need parts from pallet
first.
This installation guide is on pallet A, the wiring
diagram and other information from us are on
pallet C.
B
A
Wall structure pallet Cavities pallet
D
C
Component pallet
E
Cosmetic wall pallet
(optional)
Boxes and labels
There are several boxes with parts on each pallet.
The boxes are marked with a letter followed by
a number. The letter identifies the pallet. For
A
example A1, A2, A3, ... for the boxes on pallet A.
In general, you need box
so on. But you don't always need all the parts
contained in a box or pallet with a lower number
before you need parts from the next.
The installation guide refers to these labels to
show where the required parts for each step are.
Display pallet
A1 before box A2, and
Example from installation guide
4x
subwoofer stands A5
4x
subwoofers C1
4x
50 × 50 mm (2 × 2 in.) piece of foam A6
3