Cisco Webex Room Panorama Installation Manual page 74

26.2 Mount the lifting handle
Repeat this procedure for both screens.
Attach a handle at the center of the screen. It is
placed between two brackets and fastened with
one screw in each end.
(M6x12, Torx 30)
Front view
×2
72
26.3 Attach the grille to the screens
Repeat this procedure for both screens.
1. Remove the four screws and spacers from the
deco grille, as shown in the illustration.
You will re-use the screws and spacers when
mounting the grill on the screen.
×4
2. From front, hang the grille onto the holes of
the brackets.
3. From behind, fasten the grille to the screen
with the same screws and spacers that you
just removed.
Push up and align the grille toward the center
before tightening the screws.
×4