Cisco Webex Room Panorama Installation Manual page 16

4
Mount the cavities
The system has six cavities, which are designed
for mounting the two main screens and the
equipment behind them.
A cavity fits between two vertical risers. It hangs
on the risers, and is secured with four screws.
We recommend you to insert the cavities close to
the center first, and the display cavities last.
Cavities
1x 1x
rack cavity cooling cavity
B3 B4
2x 2x
power cavity display cavity
B5 B6
B7
24x
(M6x12, Torx 30)
14
4.1 Insert the rack cavity
Hang the cavity between the two risers as shown
in the illustration. Check that the hooks fully enter
all slots on both sides (see details on the next
page).
The top of the cavity aligns with the setback of the
center riser.
1.0 m
(39.4 in.)
Side view