Cisco Webex Room Panorama Installation Manual page 71

25.5 Secure both screens
Use the levers on the screen rails to fix the screen in a tilted position.
Repeat the procedure for the rails on both screens.
1. Carefully tilt the screen by lifting out the lower
edge.
Levers on the rails at the
back of the screens
2. Lift the lever so that the screen stays in a tilted
position.
3. Tighten the thumb screw so that it secures the
screen to the bracket.
25.6 Fasten the display cavities
Add the final two screws to fasten each display
cavity to the risers.
×2
69