Mount The Camera - Cisco Webex Room Panorama Installation Manual

21

Mount the camera

The camera is mounted on a bracket that is
fastened to the content cavity.
Camera
1x
Camera bracket A8
1x
Camera C9
2x
(M6x12, Torx 30)
56
21.1 Mount the camera bracket
The camera bracket is fastened to the content
cavity with two screws
(M6x12, Torx 30)
×2
21.2 Set the camera tilt angle to 10°
There are two sliders for adjusting the camera tilt
. angle at the bottom of the camera.
Flip down the brackets and
to 10°, which is the required tilt angle for this
product.
Flip the brackets back when done.
10°
move the sliders