Table of Contents
Advertisement
20.10 Attach a side trim to the upper front panel
Attach a side trim to the upper front panel. The left
and right trims are not equal. Take care to mount
them on the correct side.
2. Pivot the trim. Make sure it fits fully into the
3. Fasten the trim with four screws with washers
groove of the panel.
.
Repeat the procedure on both sides.
(M4x12, Torx 20, Washer, 0.9 mm)
1. Hang the side trim on the riser.
×2
This end downward.
53
Hide quick links:
Advertisement
Table of Contents
