ADC Soneplex Broadband System Operation And Maintenance Manual page 277

ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance
TAD-101
Page 6 of 9
Table 101-1. Soneplex Broadband System (V5) Specifications, continued
PARAMETER
RTAU Module
DS1 Jack Access Jack Type
Electrical Interface
Impedance
Line Code
Line Rate
Interface Connections
Alarm
Optical DS2
DS3 Input
HDSL/DS1
MPU (Front Port)
Craft Interface
Serial Ports
Port 1
Port 2
Port 3
2-254
© 2000, ADC Telecommunications, Inc.
SPECIFICATION
Bantam
Bipolar
100 ohms nominal ± 5%
AMI or B8ZS
1.544 Mbps ± 130 ppm max.
0.045 inch wire wrap post
FC or SC
75 ohm BNC
0.045 inch wire wrap post
DB-25 D subminiature
0.045 inch wire wrap post
DB-25 D subminiature
DB-25 D subminiature
REMARKS
Controlled by front panel switch
Per catalog number.
Craft, TL1 (EIA-232)
TBOS (EIA-422)
TBOS, Craft, TL1 (EIA-232)
Craft, TL1, TL1 (X.25) (EIA-232)