Cleaning Your Console; Element Console Capacities - ETC Element User Manual

Outputting DMX
In order to output control levels from your console, you can use the DMX ports on the back of
the console and/or you may connect a gateway or node. If your device receives Net3 or ETCNet2
directly, no gateway or node is required.
Element has two DMX ports. To output, connect one 5 pin XLR cable per port. The first port will
default to outputting the first universe of DMX, addresses 1-512, and the second port to the
second universe, outputting addresses 513-1024. Configuring DMX ports to something other
than the defaults is done in Browser>Setup>System Settings>Output.
See Outputs (on page 138)Outputs (on page 138)
ports.
Gateways will function with your console out of the box without previous configuration.
However if custom configuration is required, you will need to use Net3 Concert or GCE
(Gateway Configuration Editor). Concert is installed by default and can be accessed in
ECU>Settings>Maintenance>Net3 Concert. Concert is available for download from our
website, etcconnect.com. GCE software can also be downloaded from the ETC website.
For more information on Net3 gateways, see the product literature that accompanied the
hardware or download it from our website, etcconnect.com.

Cleaning Your Console

Should the exterior of your console require cleaning, you may gently wipe it with a dampened
(not dripping), non-abrasive paper towel or soft cloth.
If this does not clean the console sufficiently, you may apply some window cleaner (containing
ammonia is fine) to the cloth and repeat the process until clean.

Element Console Capacities

Output Parameters
1,024 Outputs (DMX channels)
•
Channel Counts
250 or 500 Channels (any number from 1 to 99,999)
•
Cues and Cue List
Up to 10,000 cues
•
1 Active Playback
•
1 Cue List
•
Record Targets
1,000 Groups
•
1,000 Presets
•
1,000 x 4 Palettes (Intensity, Focus, Color and Beam)
•
1,000 Curves
•
1,000 Effects
•
99,999 Macros
•
Faders
1 Grandmaster with Blackout
•
1 Master Playback, with Go and Stop/Back
•
40 or 60 Faders with bump buttons
•
16
for information on reconfiguring the DMX
Eos Family v2.9.0 Operations Manual