ETC Element User Manual page 462

Cue Data Field List Data
Cue
-
-
Stop
When accompanying a MIDI "Stop" command, data for the following fields will result in the
following actions:
Cue Data
Field
Cue
Cue
-
-
If a cue is not currently running (or already stopped), the Stop command will trigger Back, fading
back to the previous cue.
Resume
When accompanying a MIDI "Resume" command, data for the following fields will result in the
following actions. If there are no stopped cues, this action is ignored.
Cue Data Field List Data
Cue
Cue
-
-
Set
The "Set" command allows MSC to control specific faders using both a numeric control value
(which specifies the fader number) and a data field (which controls the level: 0-100). Control
values are as follows:
Control Value Data Field Indication
1-127
128
129
510
All other control values are ignored.
Note:
See
formatting MIDI messages.
Fire
This command fires a macro. MSC supports macros 1 through 127 only. Therefore a numeric
value of 1 through 127 followed by 00 (in hex) would accompany this command.
450
- Runs the specified cue in cue list 1
List Runs the next cue in the specified list
- Runs the next cue in cue list 1
List
Data
List Stops the specified cue & list (if running)
- Stops the running cue in cue list 1
List Stops the current cue from the specified list
Stops the running cue on the master fader of the console that received
-
the command
List Resumes the specified cue & list (if stopped)
- Resumes the specified cue in the default cue list
List Resumes the current cue in the specified list
- Resumes all stopped cues
0-100 Submaster 1-127
0-100 Primary playback in
0-100 Primary playback out
0-100 Grandmaster
Hexadecimal and MIDI Show Control Formatting
Field Action
Field Action
Field Action
Eos Family v2.9.0 Operations Manual
for information on