Cleaning And Maintenance - ETC High End Systems SolaWash 1000 User Manual

Cleaning and Maintenance

Keep the following in mind during regular service and inspection:
All screws for installing the device or parts of the device must be tightly connected and
•
must not be corroded.
There must not be any deformations to the housing, lenses, rigging, and installation points
•
(ceiling, suspension, trussing).
Moving parts must not show any signs of wear and must move smoothly without issue.
•
The power supply cables must not show any damage, material fatigue, or sediment.
•
If spare parts are required, order only genuine parts from your local authorized dealer.
•
CAUTION:
maintenance procedures.
In order to ensure that the device remains in good working condition and does not fail
prematurely, regular maintenance is recommended.
1. Clean the inside and outside lens regularly using a moist, lint-free cloth to avoid loss of
output due to accumulation of dust/dirt on the lens. Never use alcohol or solvents.
2. Clean the fans regularly to ensure maximum airflow and efficient cooling. This will ensure
that the light source operates in the best possible condition.
Cleaning and Maintenance
Disconnect the fixture from mains power before starting any
27