For the HS Wheel and HSB color spaces, the vertical encoder is always brightness.
Gel Picker
When the gel picker is opened up with a color space, dots will display on the color space. These
dots represent the gels in the currently selected gel book. Hovering over a dot with a mouse will
display the gel's name and a color swatch.
The following buttons are also available:
{Brightest} - determines the color match used. This is helpful when working with fixtures
•
that have more than three color components, such as RGBA, RGBWm or ETC's fixtures.
Pressing {Brightest} or {Shift} +a gel from the picker will cycle through the three modes.
{Brightest} - matches to the brightest match of that chromaticity.
•
{Spectral} -matches to the best spectral match chromaticity. However, this mode can
•
remove a lot of the intensity. This is based off of a 575w long life Source Four
{Hybrid} - halfway between the brightest and the best spectral match. In the channel
•
display, a single dot shows best spectral match, 2 dots indicates hybrid, and no dot
shows brightest.
{Sort Hue} - takes the selected gel library and sorts it by hue instead of by gel number.
•
{Similar} - will show gels that are in the same selected area of the color picker. Only gels
•
in the same selected gel book will display. You can switch to another gel book though to
discover gels in that area.
{Show Gels as Gel Against White Background} displays the raw gel color as it would look
•
against a white background. This option toggles with {Show Gels as Gel + Lamp Output}.
{Show Gels as Gel + Lamp Output} displays the gel swatch color as if it was being used
•
with a tungsten lamp.
{Show} - displays all of the static gels in the show file. This populates from Patch.
•
{Standard Colors} - shows a range of White Point from 2700K to 6500K. Also shown are
•
colors located around the triangle and variations of those colors at 25% increments.
160
®
.
Eos Family v2.9.0 Operations Manual
Need help?
Do you have a question about the Element and is the answer not in the manual?