ETC Element User Manual page 452

Note:
You will notice as events are added to the event list, the time code will display
on the Playback Status Display.
Adding Events using Learn Mode
If you select an event list within the show control display, you can press the [Learn] hardkey to
activate learn mode for that event list. When in learn mode, an event is created with the current
list time whenever a cue is activated, a submaster bump is pressed, or a macro is run. Once in
learn mode, the [Learn] key will remain lit to indicate that it is in learn mode. If the show control
display is exited, the console remains in learn mode until deactivated.
Multiple time code lists can be in learn mode simultaneously, each with their individual times. It
is recommended that you associate the event list and cue list together, so events will be learned
into the intended time code list.
To exit learn mode, the console must be in the show control display. Once there, select the
event list then press [Learn] again. If [Learn] is pressed while viewing any other screen than the
show control display an empty event will be placed on all event lists that are in learn mode.
Open the show control display.
[Displays]<More SK>{Show Control}
•
Select the event list to enable learning on.
<Event> [1] [/]
•
Press the [Learn] key.
<Event> [1] [/] [Learn]
•
In the Status column it now says Learning, and the [Learn] button is illuminated.
A {Learn Events} softkey is available in the event list. This macro-able item allows you to enable
and disable show control learn mode. Macros containing this softkey will not be included in
learned events. Other Macros can be learned as events in an Event List. Use {SC Learn} softkey
in the Macro Editor to enable/ disable excluding specific Macros from being learned as events.
See Macro Editor Display (on page 343)
Execution While Editing
If the internal or external clock is running, events will fire, even if you are in the edit screen. As
soon as an event is created, the event list is resorted, and the new event is eligible for playback.
440 Eos Family v2.9.0 Operations Manual