ETC Element User Manual page 493

OSC Method
Note:
Address
OSC Method
Selection
/eos/addr
Set Levels (Parks address while on the OSC command line)
/eos/addr/<address>
/eos/addr/<address>/dmx
Magic Sheet
OSC Method
/eos/ms
/eos/ms/<ms
number>
Group
Selects and controls channels in groups.
Note:
OSC Method
/eos/group
/eos/group/<number>
/eos/group/<number>/out
/eos/group/<number>/home
/eos/group/<number>/level
/eos/group/<number>/full
Show Control
Arguments
For the slash key, use a backslash /eos/key/\
Arguments
number for address to
select
number for level to set
address to (0-100)
number for DMX level to set
address to (0-255)
Arguments
number of the magic sheet to open
number of the magic sheet view to
open (optional)
Same syntax and behavior as Chan.
Arguments
number for group to
select
number for channel
level
number for button
edge:
1.0=down, 0.0=up
(optional)
number for button
edge:
1.0=down, 0.0=up
(optional)
number for button
edge:
1.0=down, 0.0=up
(optional)
number for button
edge:
1.0=down, 0.0=up
(optional)
Examples/Comments
(press & release [Go] button)
Examples/Comments
/eos/addr=513
/eos/addr/513=100 (useful for
mapping to an OSC slider)
/eos/addr/513/dmx=255 (useful for
mapping to an OSC slider)
Examples/Comments
/eos/ms=1
/eos/ms/1=2
Examples/Comments
/eos/group=1
/eos/group/1=75
/eos/group/1/out
/eos/group/1/home
/eos/group/1/level
/eos/group/1/full
481