5.3.2 View menu
Edid router window
This item is gray and can not be selected if the connected device does not have
EDID ROUTER installed. For more information see Section: EDID operation
Terminal window
This is a general purpose serial terminal mainly for test and debug purposes. After
a successful connection to a router this terminal can be used either via serial or
TCP/IP connection.
1.
There is a text area where the user can type in commands directly. By
default Enable framing is checked, so commands are surrounded by
framing brackets. Unchecking this box you can send multiple
instructions in one command.
2.
List the manually sent commands.
3.
All sent and received data is shown here. Every sent command and
every received response get a prefix according to the following table,
and have different background colors to distinguish.
Manual command sending panel
Command history
Communication history
Sent
Received
MX32x32DVI-Pro
User's Manual
via TCP/IP
via serial
TCP/IP ->
UART ->
TCP/IP <-
UART ->
Page 45 / 79