Firmware Upgrade - Lightware MX32x32DVI-Pro User Manual

8

Firmware upgrade

Using Lightware bootloader application to upgrade router's firmware
The matrix router can only be updated via LAN, so connect the matrix router to the
local subnet. The router is DHCP enabled so it will get an IP address automatically,
or if you do not have DHCP server, it will get an AUTO IP address from the AUTO
IP domain.
Run "Installer_LW_bootloader_v3_0_1.exe"
Run
>LW_bootloader_v3_0_1-> LW_bootloader_v3_0_1.
Click "FIND" Button. If the bootloader finds one or more routers their IP addresses
will be listed in the tree view window. On the tree view, device type and serial
number is shown after the IP address. Double click on the IP address, then click
"YES" to establish connection with the matrix router. It will take 10-15 secs to get
all information from the router.
Info Note, that you must wait until all the devices on the network completely start up,
before pressing FIND button.
The bootloader application will reset the router during the firmware upgrade.
the application from StartMenu->Programs->Lightware-
MX32x32DVI-Pro
User's Manual
Page 67 / 79