Table of Contents
Advertisement
5.5 PRESET operations
Preset operations can be done via the right panel named PRESET. Each Lightware
matrix switcher has 32 preset memories, that can be loaded and saved any time.
Front panel Preset operations effect only the first 8 preset memories, all others
from 9 to 32 are available only via Matrix Controller software.
Info
A Preset setting stores a full configuration of all outputs, that effects all outputs,
when loading a Preset.
5.5.1 SAVE PRESET
Step 1.
Step 2.
Step 3.
5.5.2 LOAD PRESET
Step 1.
Step 2.
Step 3.
5.5.3 RENAME a preset:
Each preset has its own label
renamed. To modify these labels right-click on the preset list. The following window
appears:
Example:
Select Preset3 and type the new preset name "new label", and click rename. The
new name appears in the list. Close this window.
Page 48 / 79
Make the desired configuration on matrix switching area.
Select the preset memory ( Preset1...Preset32) where you want to
save your current configuration
Press SAVE PRESET button. Now the preset is stored.
Select the preset memory ( Preset1...Preset32) you want to load as
next configuration
Press LOAD PRESET button. Now the preset is loaded
The new I/O configuration is dispalyed on the matrix switching area.
(by default:
Preset1..Preset32) which can be
Advertisement
Table of Contents
