I/Oswitching - Lightware MX32x32DVI-Pro User Manual

5.4 I/O switching
I1; I2; I3...columns represents the inputs, the O1; O2; O3...rows the outputs.
Each red bulb represents a live connection.
For making a connection click on the desired empty bulb.
Mute outputs
Outputs an be easily muted by clicking the button titled 'M' beside the output. This
means that no signal is present at this output.
Info: Switching is permitted during mute.
Lock outputs
Outputs can be locked to any inputs. After locking an input to an output
switching is permitted to this output unless it is unlocked again.
Loading a preset doesn't alter neither the lock state nor the switch state of a locked
Info:
output. If an output is locked to an input before preset loading it will also be locked
to that input after preset loading, so locked outputs ignore the preset.
MX32x32DVI-Pro
Output states
(to change state click on the icon)
- Unmuted
- Muted
- Unlocked
- Locked
User's Manual
no
Page 47 / 79