Table of Contents
Advertisement
7.4.2 Learn EDID from attached display device
The MATRIX SWITCHER can learn the EDID from the connected display device
and store it in one of user programmable memory.
All EDID is enumerated in the „Learn monitor EDID at output" list according to the
router's outputs.
Select the desired display's EDID from the list.
Step 1.
Step 2.
Choose a memory location from the to Memory list where the EDID
will be stored. Only memories 50...100 are available for user.
Step 3.
Press TAKE button. Now the EDID is stored in Matrix non volatile
memory. This procedure causes a status change and hence it is
reported back to the MATRIX CONTROL SOFTWARE within 2
seconds
MX32x32DVI-Pro
User's Manual
Page 65 / 79
Advertisement
Table of Contents
