Edid Router Commands; Route Edid To The Selected Input (Static); Route Edid To The Selected Input (Dynamic); Route One Edid To All Inputs - Lightware MX32x32DVI-Pro User Manual

3.3 EDID router commands

3.3.1 Route EDID to the selected input (static)

Description: Copies EDID from
location LLL to input ii. LLL
should be 1..100
Example:

3.3.2 Route EDID to the selected input (dynamic)

Description: Copies EDID from
location LLL to input ii. Location
LLL
opposed to static routing where LLL should be between 1..100.
Info: Inputs 1..32 are mapped to logical addresses 101..132
After choosing dynamic EDID routing to one (or all inputs) the router will follow the
EDID changes occured on the output it was connected to.
Example:
After issuing this command the router will automatically
copy the new EDID on output1 (remember logical address = 101) if it changes.

3.3.3 Route one EDID to all inputs

Description: Copies EDID from
the selected location LLL to all
inputs.
Example:

3.3.4 Save EDID from output to memory location (Learn EDID)

Description:
the specified output oo to the
specified location LLL
Example:
Page 30 / 79
should be 101..132
Learn EDID from
Command {ii:LLL}
Response (E_SW_OK)CrLf (E_S_C) CrLf
Command {ii:LLL}
Response (E_SW_OK)CrLf (E_S_C) CrLf
as
Command {A:LLL}
Response (E_SW_OK)CrLf (E_S_C) CrLf
Command {oo>LLL}
Response (E_SW_OK)CrLf (E_S_C) CrLf
→
{5:10}
←
(E_SW_OK)CrLf
←
(E_S_C) CrLf
→
{4:101}
←
(E_SW_OK)CrLf
←
(E_S_C) CrLf
→
{A:48}
←
(E_SW_OK)CrLf
←
(E_S_C) CrLf
→
{24>101}
←
(E_SW_OK)CrLf
←
(E_S_C) CrLf