Menu Description - Lightware MX32x32DVI-Pro User Manual

6.1 Menu description

The Web Manager contains the following menus and submenus:
Control
The Control Menu has two submenus.

Set and View Crosspoints
This menu appears by default, when the Web Manager starts.
It contains a matrix button area according to the input and output numbers of the
router.
Columns represents the inputs, while rows are the outputs. The green squares
represent the state of the matrix switcher.
The Preset selection box is on the right side of this page.

PLL Re-clocker Settings
This menu contains advanced settings of the matrix router, such as PLL frequency,
equalization etc...
EDID Management
By clicking on this menu, the Web Manager downloads the EDID list from the
matrix. The user can view and modify the EDIDs.
Status
Installed cards firmware, hardware versions and the router's health is displayed in
this page.
With the Refresh button the user can update the temperature, voltage and fan
values.
Configuration
This page shows the current network configuration of the matrix, such as IP
settings and port number.
Support
The contact information to Lightware Visual Engineering is shown in this page.
MX32x32DVI-Pro
User's Manual
Page 51 / 79