View Mutes On All Outputs - Lightware MX32x32DVI-Pro User Manual

Example 1: View connection on all outputs
Legend 1: output 1 is connected
2...output 32 is connected to input 32, this is the so called „diagonal pattern".
Info Note that a space character is sent after the last output
Info If an output is locked, muted, or both locked and muted, the response format
changes. If outputs are muted you get a letter 'M', if locked a letter 'L' and if muted
and locked at the same time 'U' before the 2 digit numbers.
Info The router will always respond 32 output states regardless of the installed output
cards, as the number of outputs corelates to the frame and not to the number of
installed outputs.
Example 2:
Legend 2: The connections are almost the same as in example 1, but output 1 is
muted, output 2 is locked to input 2 and output 3 is muted, and locked to input 3.

3.1.5 View mutes on all outputs

Description: The length of the response depends on the number of outputs
installed in the router. The response above supposes a router having 32 outputs.
Indexes show the actual output and the number at the given index shows its state.
If the value M5 equals 1, it means that output 5 is in mute, if 0, output 5 is not
muted.

MX32x32 frames always respond 32 outputs while MX16x16 frames always respond 16 outputs.
Page 24 / 79
(MX32x32)
→
{VC}
←
(ALL 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 )CrLf
(MX32x32)
→
{VC}
←
(ALL M01 L02 U03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 )CrLf
Command
Response
→
{VC}
←
(ALL 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16 )CrLf
to input 1, output 2 is connected to input
→
{VC}
←
(ALL M01 L02 U03 04 05 06 07 08
09 10 11 12 13 14 15 16 )CrLf

{VM}
(MUT●M1●M2●M3●M4●M5●M6●M7●M8●
M9●M10●M11●M12●M13●M14●M15●M16●
M17●M18●M19●M20●M21●M22●M23●M24●
M25●M26●M27●M28●M29●M30●M31●M32●
)CrLf
(MX16x16)
(MX16x16)