Read Out Data; Carry Out Software Update; Read In Parameters; Routing The Usb Connection Out - Kessel FKA Instructions For Installation, Operation And Maintenance

6.2.1

Read out data

• Connect USB flash drive
• Select read out data and confirm with OK. A file with the system data is stored on the USB flash drive (*.csv)
6.2.2

Carry out software update

(This is only possible if a respective file (*.bin) is on the USB flash drive)
• Connect the USB flash drive, the data transmission menu appears.
• Select software update
• Enter password and confirm with OK, the update is carried out automatically, simply follow the display dialogue.
6.2.3

Read in parameters

(This is only possible if a respective file (*.csv) is on the USB flash drive)
• Connect the USB flash drive, the data transmission menu appears.
• Select read in parameters, enter password and confirm with OK, the update is carried out automatically, simply follow
the display dialogue.
6.3

Routing the USB connection out

To make the USB socket on the board accessible without the housing having to be opened, a USB housing socket with
cable and connector for installation in the control unit housing can be ordered from KESSEL (see 1.2.2).
Adapting cable lengths, software update
48 / 148 2019/04