Maintenance; Update And Reading Out Data - Kessel Comfort PLUS Instructions For Installation And Operation Manual

4

Maintenance

The maintenance work to be done on the pumping stations operated using this control unit is described in the
respective operating and maintenance instructions for the pumping stations.
4.1

Update and reading out data

General information
For the control unit to be able to be operated with a USB flash drive inserted, this USB flash drive including
connector must not be longer than 20 mm. Otherwise the housing will not be able to be closed (see 7.4.3).
External data storage devices must not be connected, the control unit would not work (max. 100 mA power
supply). Before use, the USB flash drive must be formatted with FAT via a Windows PC and given a name.
When a USB flash drive is connected to the control unit, it will be recognised automatically. Then the data
transmission menu will appear with these selection options:
– Read out data
– Software update
– Read in parameters
If menu 0 system information is displayed, the ESC key can be used to return to the data transmission menu
described above (with USB flash drive connected).
Read out data
Connect USB flash drive.
Select read out data and confirm with OK. A file with the system data is stored on the USB flash drive (*.csv).
Carry out update
(This is only possible if a respective file (*.hex) is on the USB flash drive)
Connect the USB flash drive, data transmission menu appears.
Select software update, enter password and confirm with OK, the update is carried out automatically, simply
follow the display dialogue.
Read in parameters
(This is only possible if a respective file (*.csv) is on the USB flash drive)
Connect the USB flash drive, data transmission menu appears.
Select read in parameters, enter password and confirm with OK, the update is carried out automatically, simply
follow the display dialogue.
Maintenance
30 / 20 V 1.0