Maintenance; Update And Reading Out Data - Kessel Comfort Plus SD Instructions For Installation, Operation And Maintenance

5

Maintenance

The maintenance work to be done on the systems operated using this control unit is described in the respective
operating and maintenance instructions for the pumping stations.
5.1

Update and reading out data

External data storage devices must not be connected, the control unit would not work (max. 100 mA power
L
L
supply). Before use, the USB flash drive must be formatted with FAT via a Windows PC and given a name.
When a USB flash drive is connected to the control unit, it will be recognised automatically. Then the data
transmission menu will appear with these selection options:
y |0.1 Read out data|
y |0.2 Software update|
y |0.3 Read in parameters|
If the menu |0 System information| is displayed, the ESC key can be used to return to the data transmission
menu described above.
Read out data
Connect USB flash drive.
Carry out update
Connect the USB flash drive, data
transmission menu appears.
(This is only possible if a respective file
(*.hex) is on the USB flash drive)
Read in parameters
Connect the USB flash drive, data
transmission menu appears.
(This is only possible if a respective file
(*.csv) is on the USB flash drive)
2018/02
Maintenance
Select |Read out data| and confirm with OK. A file with
the system data is stored on the USB flash drive (*.csv).
Select |Software update|, enter password and confirm
with OK, the update is carried out automatically, simply follow the
display dialogue.
Select |Read in parameters|, enter password and
confirm with OK, the update is carried out automatically, simply
follow the display dialogue.
39 / 148