Table of Contents
Advertisement
Available languages
Available languages
3.4.1
Connect the potential-free contact
(Option)
•
Fit end sleeves (length 8 mm) to the ends of the cables
•
Attach connecting cable to the terminal strip acc. to the circuit diagram
To do so, keep the relevant cable terminal <3> pressed down against
the spring pressure with a suitable screwdriver until the end of the
cable has been inserted
•
Fit the strain relief fitting <2> for the connecting cable
(Included in the scope of delivery of the clearance code)
•
The potential-free contact must be activated using a clearance code
(art. # 80077).
Connection diagram
3.5
Connecting the control unit
•
Close the housing cover and tighten both screws <29> (seIll. [5]) (turn clockwise).
Installation
Ill. [12]
38 / 148
2
Ill. [11]
2019/04
3
Advertisement
Chapters
Table of Contents
