Leveling (Front-To-Rear) - Landoll 6230 Operator's Manual

OPERATION AND MAINTENANCE

Leveling (Front-to-Rear)

1. The leveling feature on the disc is used to keep the
disc level when raising the unit from a working
position to a transport position. The leveling feature
is also used to level the unit from front-to-rear to
perform a level discing operation in the field.
2. The unit should be level from front to rear and the soil
behind the disc should be level without furrows or
ridges. If there is a presence of a center ridge from
the rear gangs, the rear gangs are too deep. If there
is a furrow left from the rear gangs the front gangs
are too deep.
6230leveler-manual
Figure 4-10: Manual Leveler Adjustment
4-10
LEVELER HANDLE
3. On machines with manual leveler adjustment, turn
the leveler handle in or out to adjust the front-to-rear
level (See Figure 4-10.) By turning the leveler
handle in (clockwise) will lower the rear gangs in
deeper. By turning the leveler screw out
(counter-clockwise) will raise the rear gangs.
4. Implements with the optional hydraulic leveler, can
make adjustments on-the-go from the tractor. A
reference gauge is provided on the implement for a
guide.
IMPORTANT
Improperly set gauge wheels can prevent the leveler
from functioning properly. Large adjustments, either
manually or hydraulically will require adjustment of
gauge wheels.
F-440-0110 Edition