Raven SmarTrax Installation Manual page 32

Case ih patriot 2250, non-steer ready, my17 and newer

Hide thumbs Also See for SmarTrax:

Table of Contents

HAPTER

FIGURE 10. Valve Harness Routed into the Cab

3. Route the valve harness into the cab through the access panel in the right-rear corner of the cab.

4. Connect the 12-pin connector of the valve harness to the mating connector of the node harness (P/N 115-4001-

135).

SmarTrax, Case IH Patriot 2250, Non-Steer Ready, MY17 and Newer Installation Manual

Table of Contents