Install Fittings In The Smartrax Valve - Raven SmarTrax Installation Manual

Chapter 3

Install Fittings in the SmarTrax Valve

Before mounting the SmarTrax valve (P/N 063-0131-130) on the machine, install the proper fittings in the
valve. This prepares the valve for installation and simplifies the hose connection process later in the procedure.
Refer to the following figure and table to install the hydraulic fittings in the SmarTrax valve.
SmarTrax Valve
FIGURE 1.
P/N 422-0000-086
(Not Visible)
P/N 333-0012-045
Fitting - -6 JIC (M) to -6 SAE O-Ring (M) Straight Adapter
Fitting - -10 SAE O-Ring (M) to -6 JIC (M) Straight Adapter
Fitting - -10 JIC (M) to -10 SAE O-Ring (M) Straight Adapter
Transducer - 0-3000 PSI Pressure
10
The appearance of the SmarTrax hydraulic
valve may vary slightly from the images
contained in this manual. However, the fittings,
hose connections, and cable connections
remain the same.
Fitting
Miller Atlas 3654 SmarTrax™ Installation Manual
NOTICE
P/N 333-0012-106
Part Number
333-0012-045
333-0012-106
333-0012-246
422-0000-086
P/N 333-0012-246
Port
A, B
T
P, EF
PS