Scanning Documents In Quick Menu Mode - Fujitsu ScanSnap S510 Operator's Manual

■ Scanning documents in Quick Menu Mode

Operation
1. Check for the ScanSnap Manager icon on the task bar as shown below.
If the ScanSnap Manager icon is not displayed on the task bar, from the [Start]
HINT
menu, select [All Programs]
to start up ScanSnap Manager.
Generally, ScanSnap Manager is registered under "Startup" programs, so that
its icon is displayed on the task bar when Windows starts. If it is not registered
under "Startup" programs, from [Start] menu, select [All Programs]
[ScanSnap Manager]
2. Check that [Use ScanSnap Quick Menu] is marked in the menu that pops up when
the ScanSnap Manager icon
If [Use ScanSnap Quick Menu] is not marked, scanning is performed in Left-
HINT
Click Menu Mode. For how to scan the document in the Left-Click Menu Mode,
refer to "Scanning documents in Left-Click Menu Mode" (page 40).
Operation
3. Load the document onto the ScanSnap.
Refer to "3.2 Paper Size of Documents to be Scanned" (page 46) and "3.3 Loading
Documents" (page 49) for more information.
[ScanSnap Manager]
[Startup Register] to register it.
is right-clicked.
S S
ScanSnap S510 Operator's Guide
3.1 Flow of Operations
[ScanSnap Manager]
35
3