External Gps Receiver - Raven SmarTrax Calibration & Operation Manual

Ros

Hide thumbs Also See for SmarTrax:

Table of Contents

HAPTER

6. Select GPS Setup.

7. Verify that 600S on DGPS is visible and selected.

NOTE:

If 600S on DGPS is not visible or selected in the list, inspect cable connections to ensure they are

installed securely. Refer to Chapter 4, Troubleshooting beginning on page 41 for further information.

EXTERNAL GPS RECEIVER

The steps below apply only to Viper 4 computers with an external GPS receiver other than model 600S.

FIGURE 6. Serial Device Setup Screen

1. Select Edit.

Edit

GPS Setup

Serial Devices

ROS SmarTrax™ Calibration & Operation Manual

Table of Contents