Introduction; Installation; Recommendations - Raven SmarTrax Calibration & Operation Manual

CHAPTER
2
Congratulations on your purchase of the Raven SmarTrax system! This system is designed to provide cutting-edge,
hands-free steering of the machine via Global Positioning System (GPS) coordinates.
The instructions in this manual are designed to assist in the proper calibration and operation of the SmarTrax
system when used with the Viper 4 field computer.
IMPORTANT: Installation of the SmarTrax system must be completed before calibrating the system. If you have
questions regarding the installation of the SmarTrax system, refer to the machine-specific SmarTrax
Installation Manual provided with the installation kit.
IMPORTANT: The Raven field computer must be calibrated specifically for the vehicle before being used to operate the
SmarTrax system. For questions about the field computer, refer to the Installation & Operation Manual
provided with the field computer.

INSTALLATION

RECOMMENDATIONS

Before installing the SmarTrax system, park the machine where the ground is level, clean, and dry. Bleed pressure
from the hydraulic system and leave the machine turned off for the duration of the installation process.
During the installation process, follow good safety practices. Be sure to carefully read the instructions in this
manual as you complete the installation process.
Raven Industries recommends the following best practices when installing or operating the SmarTrax system for
the first time, at the start of the season, or when moving the SmarTrax system to another machine:
• Verify that the machine's hydraulic system is using fresh oil and that the filters have been recently changed
• Ensure there are no issues with the machine's hydraulic system (e.g., pump issues, faulty hydraulic motors, fine
metal deposits in the hydraulic hoses, etc.) .
P/N 016-9001-022 Rev. D
I NTRODUCTION
C H A P T E R 2
WARNING
Carefully read and follow all safety requirements
and precautions contained in this manual and the
machine-specific Installation Manual. Failure to
follow safety instructions may lead to equipment
damage, personal injury, or death.
3