Raven SmarTrax Calibration & Operation Manual page 13

Ros

Hide thumbs Also See for SmarTrax:

Table of Contents

FIGURE 1. GPS Setup Screen

Edit

1. Press Edit.

2. Press GPS Setup.

3. Select GPS Settings.

4. Select the GPS Output tab.

5. Select GPS Out from the Ports drop-down box.

6. Select the Set for SmarTrax box so that the blue check mark is present.

7. Verify that the GPS settings match the settings shown in the right picture in Figure 1 above.

FIGURE 2. Serial Device Setup Screen

P/N 016-9001-022 Rev. D

GPS Setup

Edit

GPS Settings

Serial Devices

VIPER 4

GPS Output

Table of Contents