Spark Plug; Ignition Coil Inspection - KYMCO G-DINK 300i Service Manual

17. IGNITION SYSTEM

SPARK PLUG

For spark plug inspection and adjustment,
refer to page 3-5.

IGNITION COIL INSPECTION

Remove the seat and met-in box. ( 2-6)
Remove the ignition coil.
IGNITION COIL CONTINUITY
TEST
Inspect the continuity of the ignition coil,
primary coil and secondary coil.
＊
This is a general test. Accurate ignition
coil test must be performed with an
ignition unit tester.
Measure the ignition coil resistances at 20℃.
Primary coil
Secondary coil with
plug cap
Secondary coil
without plug cap
17-3
3.57~4.83Ω
15 ~ 19 KΩ
10 ~14 KΩ
Ignition Coil
Secondary Coil with plug cap
Secondary Coil without plug cap
G-DINK 300i
Primary Coil