6. CYLINDER HEAD/VALVES
G-Dink 300i
CAMSHAFT
REMOVAL
Turn the A.C. generator flywheel so that the
"T" mark on the flywheel aligns with the
index mark on the right crankcase cover
Hold the round hole on the camshaft gear
facing up and the location is the top dead
center on the compression stroke.
Remove the cam chain tensioner lifter sealing
Round Hole
Cam Chain Tensioner
bolt.
Tensioner Screw
Turn the cam chain tensioner screw
clockwise to pull the tensioner rod all the way
in.
Camshaft Holder
Remove the four cap nuts attaching the
camshaft holder.
*
• Diagonally loosen the cylinder head
cap nuts in 2 or 3 times.
Cap Nuts
6-6
9-6