KYMCO G-DINK 300i Service Manual page 167

13. FUEL INJECTION SYSTEM
G-DINK 300i
Battery
FUEL PUMP RELAY
INSPECTION
Remove the fuel pump relay.
Connect the ohmmeter to the fuel pump
relay connector terminals.
Connection: Black – Red/Black
Connect 12 V battery with the fuel pump
pump
Fuel Relay
relay connector.
Connection: Blue/Black – Black
There should be continuity only when 12 V
battery connected.
If there is not continuity when the 12 V
battery is connected, replace a fuel pump
relay.
REMOVAL
Disconnect the fuel pump relay connector
and remove it from frame.
pump
Fuel Relay
13-18