Cylinder Head - KYMCO G-DINK 300i Service Manual

6. CYLINDER HEAD/VALVES

CYLINDER HEAD

First drain the coolant from the radiator and
water jacket, then remove the thermostat
water hose.
Remove the camshaft.
Remove the carburetor and intake pipe.
Remove the two cylinder bolts.
Remove the bolt attaching the thermostat
housing and the thermostat housing.
Remove the cylinder head.
Remove the dowel pins and cylinder head
gasket.
Remove the cam chain guide.
Remove all gasket material from the cylinder
head mating surface.
＊
Be careful not to drop any gasket
material into the engine.
Cylinder Bolts
Cylinder Cam Chain Tensioner Slipper
G-Dink 300i
Bolt
Cylinder Head Gasket
6-10
9-10