Front Brake Fluid - KYMCO G-DINK 300i Service Manual

14. HANDLEBAR/FRONT WHEEL/FRONTBRAKE/
FRONT SHOCK ABSORBER/STEERING STEM

FRONT BRAKE FLUID

FLUID REPLACEMENT/AIR
BLEEDING
＊
● A contaminated brake disc or pad
reduces stopping
contaminated
contaminated disc with a high quality
brake degreasing agent.
● Do not allow foreign material to enter
the system when filling the reservoir.
● Avoid spilling brake fluid on painted,
plastic or rubber parts. Place a rag
over these parts whenever the system
is serviced.
BRAKE FLUID DRAINING
Make sure that the master cylinder parallel to
the ground before removing the reservoir
cover.
Remove two screws.
Remove the reservoir cover, diaphragm plate
and diaphragm.
Connect a bleed hose to the bleed valve.
power. Discard
pads and clean a
G-DINK 300i
14-8