Side Stand - KYMCO G-DINK 300i Service Manual

3. INSPECTION/ADJUSTMENT

SIDE STAND

Your scooter's side stand is not only necessary
when you park, but it contains an important
safety feature. This feature cuts-off the ignition if
you try to ride the scooter when the side stand
is down. Perform the following side stand
inspection.
INTERLOCK FUNCTION CHECK
Check the side stand ignition cut-off system,
1. Place the scooter on its center stand.
2. Put the side stand up and start the engine.
3. Lower the side stand. The engine should stop
as you put the side stand down.
＊
If the side stand system does not
operate as described, see your KYMCO
dealer for service.
G-DINK 300i
3-12