11. DRIVE AND DRIVEN PULLEY
Filling 25 g of grease to the driven face inner
surface.
Apply grease to new needle bearing.
Press the needle bearing into the driven.
INSPECTION
Clutch Outer
Check the clutch outer for wear or damage.
Measure the clutch outer I.D..
Service limit:
153.5 mm (6.14 in)
Clutch Shoe Lining
Check the clutch shoe for wear or damage.
Measure the thickness of each shoe.
Service limit: 1 mm (0.04 in)
11-13
8-13
Grease
G-Dink 300i
Needle Bearing