KYMCO G-DINK 300i Service Manual page 107

11. DRIVE AND DRIVEN PULLEY
Hold the clutch outer with the special tool as
shown.
Special tool:
Universal holder
Install the nut.
Tighten the nut to the specified torque.
Torque:
54 N•m (5.4 kgf•m, 36 lbf•ft)
Install the drive pulley face and washer.
Apply oil to the drive pulley face nut threads
and seating surface and install the nut.
Hold the drive face with the special tool and
tighten the bolt to the specified torque.
Special tool:
Universal holder
Torque:
93 N•m (9.3 kgf•m, 67 lbf•ft)
8-9
11-9
Drive Pulley Collar
A120E00017
A120E00017
Drive Belt
Universal Holder
Drive Pulley
G-Dink 300i
Driven Pulley