Final Reduction; Service Information; Troubleshooting - KYMCO G-DINK 300i Service Manual

9

. FINAL REDUCTION

SERVICE INFORMATION

GENERAL INSTRUCTIONS
• The servicing operations of this section can be made with the engine installed.
• When replacing the drive shaft, use a special tool to hold the bearing inner race for this operation.
SPECIFICATIONS
Specified Oil: SAE 90#
Oil Capacity:
At disassembly : 0.2 liter
At change
TORQUE VALUES
Transmission case cover bolt
Oil check bolt
SPECIAL TOOLS
Bearing remover, 12mm
Bearing remover, 15mm
Pilot, 12mm
Pilot, 15mm

TROUBLESHOOTING

Engine starts but motorcycle won't move
• Damaged transmission
• Seized or burnt transmission
Abnormal noise
• Worn, seized or chipped gears
• Worn bearing
Oil leaks
• Oil level too high
• Worn or damaged oil seal
: 0.18 liter
17.7～21.6N-m
7.8～11.8N-m
G-Dink 300i
9-2