Ata Flat Cable Connection; Figure 5-10: Ide Cable Connection - IEI Technology PCIE-9450 User Manual
Picmg 1.3 lga775 intel core 2 duo, pentium 4/d vga, dual pcie gbe, sata ii and usb2.0
Hide thumbs
Also See for PCIE-9450:
- Quick installation manual (3 pages) ,
- Quick installation manual (8 pages)
Table of Contents
Advertisement
5.6.2 ATA Flat Cable Connection
The ATA 66/100 flat cable connects to the PCIE-9450 IDE device. Follow the instructions
below to connect an IDE HDD to the PCIE-9450.
Step 1:
Locate the IDE connector. The locations of the IDE device connectors are
shown in Chapter 3.
Step 2:
Insert the connector. Connect the IDE cable connector to the onboard
connector. See Figure 5-10. A key on the front of the cable connector ensures it
can only be inserted in one direction.
Figure 5-10: IDE Cable Connection
Step 3:
Connect the cable to an IDE device. Connect the two connectors on the other
side of the cable to one or two IDE devices. Make sure that pin 1 on the cable
corresponds to pin 1 on the
Page 74
PCIE-9450 PICMG 1.3 CPU Card
connectorStep 0:
Advertisement
Table of Contents
