Figure 5-2: Remove The Cpu Socket Protective Shield; Figure 5-3: Open The Cpu Socket Load Plate - IEI Technology PCIE-9450 User Manual
Picmg 1.3 lga775 intel core 2 duo, pentium 4/d vga, dual pcie gbe, sata ii and usb2.0
Hide thumbs
Also See for PCIE-9450:
- Quick installation manual (3 pages) ,
- Quick installation manual (8 pages)
Table of Contents
Advertisement
PCIE-9450 PICMG 1.3 CPU Card
Figure 5-2: Remove the CPU Socket Protective Shield
Step 2:
Open the socket. Disengage the load lever by pressing the lever down and
slightly outward to clear the retention tab. Rotate the load lever to a fully open
position. Then rotate the load plate towards the opposite direction. See Figure
5-23.
Figure 5-3: Open the CPU Socket Load Plate
Step 3:
Inspect the CPU socket Make sure there are no bent pins and make sure the
socket contacts are free of foreign material. If any debris is found, remove it with
compressed air.
Step 4:
Orientate the CPU properly. Make sure the IHS (Integrated Heat Sink) side is
Page 65
Advertisement
Table of Contents
