Single Rs-232 Cable Connection; Figure 5-12: Single Rs-232 Cable Installation - IEI Technology PCIE-9450 User Manual
Picmg 1.3 lga775 intel core 2 duo, pentium 4/d vga, dual pcie gbe, sata ii and usb2.0
Hide thumbs
Also See for PCIE-9450:
- Quick installation manual (3 pages) ,
- Quick installation manual (8 pages)
Table of Contents
Advertisement
PCIE-9450 PICMG 1.3 CPU Card
5.6.4 Single RS-232 Cable Connection
The single RS-232 cable consists of one serial port connectors attached to a serial
communications cable that is then attached to a D-sub 9 male connector that is mounted
onto a bracket. To install the single RS-232 cable, please follow the steps below.
Step 1:
Locate the connector. The location of the RS-232 connector is shown in
Chapter 3.
Step 2:
Insert the cable connector. Insert the connector into the serial port box header.
See Figure 5-12. A key on the front of the cable connectors ensures the
connector can only be installed in one direction.
Figure 5-12: Single RS-232 Cable Installation
Step 3:
Secure the bracket. The single RS-232 connector has one D-sub 9 male
connector secured to a bracket. To secure the bracket to the chassis please
refer to the reference material that came with the
chassisStep 0:
Page 77
Advertisement
Table of Contents
